Search Posts:

OSI C1P Update - RAM and Cassette

View Entire Thread

Return to Threads

SHARE
  by Bill Degnan - 09/18/2011 19:04
With the covers removed you can see that the OSI Challenger 1P is just an OSI 600 SBC with a case. Click image for larger view


The computer was returning an inconsistent quantity of free RAM, indicating one or more chips was bad.

I disassembled the system in order to access the RAM. I positioned the disassembled OSI Challenger's motherboard so that I could test components while powered / live system. View working disassembled


A view of the OSI 1P 2114 RAM chips. 16 2114 RAM chips = 8K. Click image for larger view


As you can see from the pictures, the system needs some cleaning.

First I replaced the inconsistent RAM until the system returned "7423 Bytes Free" when first booting into BASIC every time.


To access basic type "C" and press return at the D/C/W/M ? prompt.


The monitor program and BASIC are stored on ROM chips. Click image for larger view


Next I carefully photographed all of the mods done to this system (factory or owner?), in the event that a brittle solder connection comes lose and requires repair.

  • J3 Connector (Modem/RS232) 2 3 4 5

  • J4 Connector (Joystick)2 3

  • Cassette baud 300/600 switch 1 2 3 4 5 6 *

    * Note that the orange and brown wires in the photos are not part of the mod, these wires are used to power the "on/off" light.

    After the system checkout, I proceeded to write a simple BASIC program and store it to tape. Worked, good. I also loaded RAM test program I found to test the RAM. No errors found, good.

    Boot screen from SeaWolf program, loaded from cassette storage.


    To load a cassette:
    enter BASIC and then type LOAD (but don't press Return yet). Position the cassette to the beginning of the program and press play on the cassette player. Hit Return.

    I have my volume turned to 7 with tone set to 9.

    The program will actually show the BASIC listing on the screen as it's loading. If you see errors in the program entry (missing / misprinted line numbers for example), adjust the volume or tone until you get a consistent result. If you see a bunch of garbled characters before the program listing appears on the screen, don't worry as long as they stop before the first line of BASIC code appears. If ALL you see are garbled characters and the BASIC program listing never materializes, you may have a bad tape/player.

    When the load is done ignore the syntax error warning at the end of the loading process. Hit "SPACE" and then "Return". Stop the tape.

    If the program loaded correctly type RUN and Return.
    More / Updated Photos



    Reply
  • Resources:


    Buy a Commodore Computer Poster

    Popular Topics and FAQs


  • Commodore B Series Tips and Tricks
  • Aerocomp TRS 80 M 1 Expansion Unit DDC
  • Items Wanted
  • Lobo Max 80
  • Zenith Z-19-CN
  • Prototype PET 2001 photo
  • Using Toggle Switches to Analyze Memory
  • Commodore Disk Archive Project
  • PET 2001 Prototype at Gametronics 1977
  • Jim Butterfield Photo
  • IMSAI 8080 With Processor Tech. Cutter
  • Secrecy is the keystone of all tyranny
  • Cromemco System Three
  • Northstar Horizon - Boot Problem
  • Computer History and Restoration Links
  • Commodore BX-256-80 - 8088 Co-processor
  • S-100 board testing with Z-80 ICE
  • Donner 3500 - an early portable computer
  • Digital (DEC) PDP 11/05 NC Assembly
  • Univac 1219 rescue
  • IMSAI 1.4 BASIC vs. MITS 8K BASIC
  • Fido BBS listing node list 6-13-1986
  • PDP 8e
  • MITS 88-2 SIO (2SIO) for BASIC
  • Visual Technology Inc Model 1050
  • Amiga 2500 Restoration
  • The Evolution Of IBM Computers
  • Replacement teletype print hammer head
  • Archiving and Copying Software 101
  • Computers Built 1940 - 1950
  • CBM B-520 (a.k.a B256-80 or B500 256)
  • RCA COSMAC Microkit
  • Commodore 64K C-116 Mods
  • MITS 8800b Turnmon 9600 baud
  • Catweasel, 8in and 5 1/4
  • Raspberry Pi as Gateway to Internet
  • Digital PDP11 late 1969 early 1970
  • PDP 11/40 72 inch cabinet model
  • PDP 11/40 Industrial 11 model
  • Digitial MicroVAX 3100 30 System
  • Digital VAX 4000-200
  • Commodore 64 / 1541 DRIVEKNOCK
  • Booting the System Using RL02 drive
  • PACS: Reflections by Kathleen Mauchly
  • Tele-Graphic Computer Systems Inc.
  • Commodore B Series SID Jukebox?
  • Installing Core into PDP 11/40
  • Setting Up OpenVMS 7.1 DNS CLERK
  • Felt-Tarrant Comptometer Model J
  • NextStation Color
  • Digital Rainbow (PC100-B2)
  • 1970 Compusad Compulogical Tutor
  • Archiving Papertapes Using DSI NC 2400
  • 1976 P.C.C. Features the MAI JOLT 6502
  • 1961 Beckman DEXTIR Computer
  • UNIVAC 1 and UNIVAC File Computer 1
  • Past Issues:


    400 800 BASIC man

    This image was selected at random from the archive. Click image for more photos and files from this set.